Un nouveau caillou MS 50mm

titoufx

Message supprimé à la demande de son auteur.
Serendipity
Avatar de l’utilisateur
Spécialiste
Messages : 1024
Depuis le 22 août 2007
NowHere {Bruxelles}, mais aussi Paname & Gotham
titoufx a écrit :
il me manque mon p'tit sonnetar... mais j'utilise trop peu le 50mm pour justifier la possession de ce beau cailloux :)

https://www.flickr.com/photos/titouflck ... 435941775/


Bien belle galerie pour un objectif très racé...
Au négatif j'ai toujours préféré la diapo, parce qu'elle est positive.
titoufx

Message supprimé à la demande de son auteur.
Serendipity
Avatar de l’utilisateur
Spécialiste
Messages : 1024
Depuis le 22 août 2007
NowHere {Bruxelles}, mais aussi Paname & Gotham
titoufx a écrit :
j'aimerai bien voir ce qu'il donne dans les mains de quelqu'un qui maitrise le 50mm et qui sait faire de vraies photos :ravi:


Si mes souvenirs sont exacts, un des photographes d'une grande agence qui fera bientôt l'objet d'une série tv devrait en posséder un :smile: , reste à voir où sont visibles les photos réalisées avec cet objectif....
Au négatif j'ai toujours préféré la diapo, parce qu'elle est positive.
discus64
Habitué
Messages : 336
Depuis le 23 avr 2009
Pau - France
Si les photos sont à la hauteur de ce "teasing"... Soit on se régale, soit ça reste flou...
:oops: :wink:
Dura Lux Sed Lux
boyan_d
    Ajustement du coma sur la lentille arrière du MS-Optical Sonnetar 50 mm
Avatar de l’utilisateur
Habitué
Messages : 534
Depuis le 26 oct 2016
Strasbourg
Bonsoir,

L'anneau d'ajustement du coma de la lentille arrière a 4 positions pour améliorer la mise au point selon la distance du sujet : à 1 mètre, 2 mètres, 4 mètres ou l'infini.
Il n'y a cependant aucune indication autre qu'un point rouge. Quelqu'un sait-il à quelle distance il correspond : 2 mètres ou 4 mètres ?

Cordialement,
Boyan
- - - - -
Quelle est la différence entre un montage ?
On arrive plus haut en bas qu'à pied.

globulot.fr
boyan_d
Avatar de l’utilisateur
Habitué
Messages : 534
Depuis le 26 oct 2016
Strasbourg
Je viens de trouver ce document en anglais, très explicite quant à la manière d'utiliser l'anneau d'ajustement du coma :
page web : http://www.japanexposures.com/shop/came ... 0-1.1.html
doc pdf : http://www.japanexposures.com/shop/inde ... ment_id=10

//
Special Note on MS 50mm 1.1 Sonnetar Lens Coma Adjustment for Focusing and Photo Quality improvement
by Sadayasu Miyazaki

(1) MS 50mm 1.1 Sonnetar lens has a coma adjustment system.

Coma adjustment is necessary for focusing and improving picture quality of the Sonnar lens design. There is a coma adjustment rotating ring on the rear part of the lens. On the ring, you will find four marked dots as follows:

1.white dot (best for infinity)
2.red dot (best for 4m distance)
3.white dot (best for 2m distance)
4.white dot (best for 1m distance)

Adjacent to the coma adjustment ring, you will find a white reference point (see the above illustration) to which an appropriate ring position has to be matched by rotating the ring. Using the coma adjustment system, a very high level tuning/focusing optimisation is made possible.


(2) Use of the Coma Adjustment System

1. For Mirror-less SLR Camera Users
You can use the above coma adjustment system freely. According to the distance to a picture object, set an appropriate position to the reference point by rotating the coma adjustment ring. This adjustment would bring about an improvement in the picture quality on peripheral area.

2. For Leica M Type Rangefinder Camera Users
Initially, bring the red dot of the ring to the white reference point by rotating the coma adjustment ring. As you familiarise yourself to this lens, you may wish to change the ring position either to the left or right. For example, at the infinity best point, the actual focus point will be slightly brought forward (therefore, take a photo with focus point slightly backward). At the white dot that is best for 2m distance, a focus point will be slightly brought backward (therefore, take a photo with focus point slightly forward). This might take some practice and experience to achieve best results.


(3) Rear Lens Cap and Use of Leica M mount adapters

It might happen that the coma adjustment ring be slightly moved unintentionally when screwing in/out the rear lens cap. Please be careful about it.

MS-OP R&D Oct 2012

//
- - - - -
Quelle est la différence entre un montage ?
On arrive plus haut en bas qu'à pied.

globulot.fr
boyan_d
Avatar de l’utilisateur
Habitué
Messages : 534
Depuis le 26 oct 2016
Strasbourg
En fait c'est un FLE (Floating Lens Element) manuel.
- - - - -
Quelle est la différence entre un montage ?
On arrive plus haut en bas qu'à pied.

globulot.fr
Précédente

Retourner vers Compatibles

Qui est en ligne

Utilisateurs parcourant cette section : Aucun utilisateur enregistré et 6 invités

cron